74AHCT377D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74AHCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT377D-Q100J Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. Temperature is set to -40°C~125°C TA. It is an electronic flip flop with the type D-Type. The 74AHCTseries comprises this type of FPGA. A frequency of 130MHzshould be the maximum output frequency. A total of 1elements are contained within it. A total of 20 terminations have been made. Members of the 74AHCT377family make up this object. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 3pF farads. Devices in the AHCT/VHCT/VTfamily are electronic devices. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. The flip flop is designed with 8bits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. A total of 8input lines have been provided. 4μAquiescent current consumed.
74AHCT377D-Q100J Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT377D-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHCT377D-Q100J Flip Flops applications.
- Load Control
- Latch-up performance
- Divide a clock signal by 2 or 4
- Functionally equivalent to the MC10/100EL29
- Single Up Count-Control Line
- Asynchronous counter
- Control circuits
- Computing
- Test & Measurement
- Consumer
