74AHCT377D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 5.7 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74AHCT377D,112 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tube, it is embedded. There is a Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74AHCT series. It should not exceed 130MHzin its output frequency. In total, it contains 1 elements. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. You can search similar parts based on 74AHCT377. A voltage of 5V provides power to the D latch. A 3pFfarad input capacitance is provided by this T flip flop. Devices in the AHCT/VHCTfamily are electronic devices. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. 8bits are used in its design. The supply voltage should be maintained at 5V for high efficiency. The number of input lines is 8.
74AHCT377D,112 Features
Tube package
74AHCT series
20 pins
8 Bits
74AHCT377D,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT377D,112 Flip Flops applications.
- Event Detectors
- Differential Individual
- Test & Measurement
- Latch
- 2 – Bit synchronous counter
- Frequency Dividers
- Clock pulse
- ESCC
- Shift Registers
- Circuit Design
