74AHCT377PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 5.7 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74AHCT377PW,112 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. T flip flop uses Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. A frequency of 130MHzshould not be exceeded by its output. There are 1 elements in it. During its operation, it consumes 4μA quiescent energy. There have been 20 terminations. JK flip flop belongs to 74AHCT377 family. It is powered by a voltage of 5V . Its input capacitance is 3pFfarads. It belongs to the family of electronic devices known as AHCT/VHCT. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. If high efficiency is desired, the supply voltage should be kept at 5V. It operates with 8 output lines.
74AHCT377PW,112 Features
Tube package
74AHCT series
20 pins
8 Bits
74AHCT377PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT377PW,112 Flip Flops applications.
- Synchronous counter
- QML qualified product
- Set-reset capability
- Latch
- Single Down Count-Control Line
- Balanced Propagation Delays
- Bounce elimination switch
- Digital electronics systems
- ATE
- ESCC
