banner_page

74AHCT573BQ-Q100X

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74AHCT Series 74AHCT573 20 Pins QUAD CMOS 20-VFQFN Exposed Pad


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74AHCT573BQ-Q100X
  • Package: 20-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 173
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74AHCT Series 74AHCT573 20 Pins QUAD CMOS 20-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-VFQFN Exposed Pad
Number of Pins 20
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100, 74AHCT
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number 74AHCT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Number of Ports 2
Number of Bits 8
Quiescent Current 4μA
Turn On Delay Time 3.5 ns
Family AHCT/VHCT/VT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 8mA 8mA
Logic Type D-Type Transparent Latch
Independent Circuits 1
Length 4.5mm
Width 2.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

74AHCT573BQ-Q100X Overview


In the 20-VFQFN Exposed Pad package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~125°C is set as the operating temperature. In the Automotive, AEC-Q100, 74AHCT series, this FPGA is located. It is designed with 8 bits. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74AHCT573. With a supply voltage of 5V, it operates. There are 20 pins on it. There is a device in this electronic family called AHCT/VHCT/VT. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. High efficiency requires maintaining the supply voltage at 5V. Aquiescent current is consumed by 4μA without being affected by external forces.

74AHCT573BQ-Q100X Features


20-VFQFN Exposed Pad package
Automotive, AEC-Q100, 74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins

74AHCT573BQ-Q100X Applications


There are a lot of Nexperia USA Inc. 74AHCT573BQ-Q100X Latches applications.

  • Communication systems
  • Automotive HEV/EV Powertrain
  • Counters
  • Automotive Cluster
  • Pattern Generators
  • Serial Output Data Queuing
  • Up-Down Johnson
  • Stacked or Push-Down Registers
  • TV Set-top Boxes
  • Serial Output Register

Write a review

Note: HTML is not translated!
    Bad           Good