74AHCT573PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 3.5 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT573PW,112 Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. Tube is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~125°C is set as the operating temperature. 74AHCT is the series number of this FPGA. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74AHCT573. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. AHCT/VHCT/VT is the family name of this electronic device. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. There are 8 input lines in which electronic circuits are present. High efficiency requires a voltage supply of 5V.
74AHCT573PW,112 Features
20-TSSOP (0.173, 4.40mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
74AHCT573PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT573PW,112 Latches applications.
- Meter applications
- Counter control
- High-speed logic
- Automotive ADAS
- Data acquisition
- Synchronous frequency dividers
- Automotive Body Electronics
- Serial Input
- Accumulator Registers
- Frequency
