74AHCT574BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT574BQ,115 Overview
The flip flop is packaged in 20-VFQFN Exposed Pad. Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to -40°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74AHCTseries of FPGAs. Its output frequency should not exceed 115MHz. A total of 1elements are present in it. It consumes 4μA of quiescent Terminations are 20. D latch belongs to the 74AHCT574 family. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 3pF farads. A device of this type belongs to the family of AHCT/VHCT/VT. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 8bits. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be set to 5V. As of now, there are 8input lines.
74AHCT574BQ,115 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT574BQ,115 Applications
There are a lot of Nexperia USA Inc. 74AHCT574BQ,115 Flip Flops applications.
- Data storage
- Counters
- ESCC
- Bounce elimination switch
- Computers
- Modulo – n – counter
- Functionally equivalent to the MC10/100EL29
- Buffered Clock
- Data Synchronizers
- Cold spare funcion
