74AHCT574D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Clock Frequency | 115MHz |
| Family | AHCT/VHCT/VT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74AHCT574D,118 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74AHCTseries of FPGAs. Its output frequency should not exceed 115MHz Hz. D latch consists of 1 elements. This process consumes 4μA quiescents. There have been 20 terminations. The 74AHCT574 family contains this object. An input voltage of 5Vpowers the D latch. A JK flip flop with a 3pFfarad input capacitance is used here. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. The electronic flip flop is designed with pins 20. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. This D flip flop is equipped with 0 ports. The 25mA output current allows it to be designed with the greatest amount of flexibility. It is also characterized by BROADSIDE VERSION OF 374.
74AHCT574D,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
74AHCT574D,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT574D,118 Flip Flops applications.
- ESD performance
- Buffered Clock
- Load Control
- Synchronous counter
- Balanced Propagation Delays
- Cold spare funcion
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- Test & Measurement
- Shift registers
