74AHCT574PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Ports | 2 |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT574PW,118 Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74AHCT series. You should not exceed 115MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74AHCT574, you will find similar parts. The power supply voltage is 5V. There is 3pF input capacitance for this T flip flop. It is a member of the AHCT/VHCT/VTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. The flip flop contains 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. Featuring the maximum design flexibility, it has an output current of 25mA . This input has 8lines. In addition, BROADSIDE VERSION OF 374is a characteristic of it.
74AHCT574PW,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT574PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT574PW,118 Flip Flops applications.
- Registers
- ESD protection
- ATE
- ESD performance
- Balanced Propagation Delays
- Frequency Divider circuits
- Cold spare funcion
- Balanced 24 mA output drivers
- Clock pulse
- Patented noise
