74AHCT74BQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Clock Frequency | 140MHz |
| Family | AHCT/VHCT/VT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| fmax-Min | 80 MHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT74BQ-Q100X Overview
In the form of 14-VFQFN Exposed Pad, it has been packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74AHCT series. It should not exceed 140MHzin its output frequency. In total, it contains 2 elements. It consumes 2μA of quiescent 14terminations have occurred. JK flip flop belongs to 74AHCT74 family. The D flip flop is powered by a voltage of 5V . A 3pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of AHCT/VHCT/VT. A total of 14pins are provided on this board. For high efficiency, the supply voltage should be set to 5V.
74AHCT74BQ-Q100X Features
Tape & Reel (TR) package
74AHCT series
14 pins
74AHCT74BQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74AHCT74BQ-Q100X Flip Flops applications.
- ESD performance
- Counters
- Safety Clamp
- Set-reset capability
- Parallel data storage
- Storage Registers
- Shift Registers
- Frequency division
- Pattern generators
- Single Down Count-Control Line
