74AHCT74BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 140MHz |
| Propagation Delay | 3.3 ns |
| Turn On Delay Time | 4.8 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT74BQ,115 Overview
The flip flop is packaged in a case of 14-VFQFN Exposed Pad. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The 74AHCTseries comprises this type of FPGA. You should not exceed 140MHzin its output frequency. It consumes 2μA of quiescent current without being affected by external factors. Terminations are 14. The 74AHCT74 family contains this object. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as AHCT/VHCT/VT. It is mounted by the way of Surface Mount. There are 14pins on it. A Positive Edgeclock edge trigger is used in this device. Due to its superior flexibility, it uses 2 circuits. Optimal efficiency requires a supply voltage of 5V. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74AHCT74BQ,115 Features
Tape & Reel (TR) package
74AHCT series
14 pins
74AHCT74BQ,115 Applications
There are a lot of Nexperia USA Inc. 74AHCT74BQ,115 Flip Flops applications.
- ESD protection
- Common Clocks
- Digital electronics systems
- ATE
- Reduced system switching noise
- Balanced Propagation Delays
- QML qualified product
- Control circuits
- Registers
- Bus hold
