74AHCT74D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 25mA |
| Clock Frequency | 140MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 4.8 ns |
| Family | AHCT/VHCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHCT74D,112 Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. This output is configured with Differential. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~125°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. FPGAs belonging to the 74AHCTseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 140MHz. As a result, it consumes 2μA of quiescent current without being affected by external factors. A total of 14terminations have been recorded. The object belongs to the 74AHCT74 family. It is powered by a voltage of 5V . Its input capacitance is 3pFfarads. The electronic device belongs to the AHCT/VHCTfamily. There is an electronic component mounted in the way of Surface Mount. This board is designed with 14pins on it. This device's clock edge trigger type is Positive Edge. Due to its superior flexibility, it uses 2 circuits. For high efficiency, the supply voltage should be kept at 5V. With a current output of 25mA , it offers maximum design flexibility. In order for the chip to function, it has 1output lines.
74AHCT74D,112 Features
Tube package
74AHCT series
14 pins
74AHCT74D,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT74D,112 Flip Flops applications.
- Matched Rise and Fall
- Individual Asynchronous Resets
- Load Control
- Digital electronics systems
- Single Up Count-Control Line
- Single Down Count-Control Line
- Dynamic threshold performance
- Instrumentation
- EMI reduction circuitry
- Safety Clamp
