74AHCT74PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 140MHz |
| Propagation Delay | 3.3 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 4.8 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT74PW,112 Overview
The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. There is an embedded version in the package Tube. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74AHCT series. A frequency of 140MHzshould be the maximum output frequency. Terminations are 14. It is a member of the 74AHCT74 family. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 3pF farads. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device has Positive Edgeas its clock edge trigger type. The superior flexibility is achieved through the use of 2 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. In order for the chip to function, it has 1output lines. In terms of quiescent current, it consumes 2μA .
74AHCT74PW,112 Features
Tube package
74AHCT series
14 pins
74AHCT74PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT74PW,112 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Event Detectors
- Balanced 24 mA output drivers
- Supports Live Insertion
- Test & Measurement
- Matched Rise and Fall
- Patented noise
- Shift registers
- Registers
- Data Synchronizers
