74AHCT74PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 140MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 4.8 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT74PW,118 Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74AHCT series. In order for it to function properly, its output frequency should not exceed 140MHz. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AHCT74 family contains this object. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3pF farads. It is a member of the AHCT/VHCT/VTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Positive Edge. Due to its superior flexibility, it uses 2 circuits. Optimal efficiency requires a supply voltage of 5V. It has 1 output lines to operate. It consumes a total of 2μA quiescent current at any given time.
74AHCT74PW,118 Features
Tape & Reel (TR) package
74AHCT series
14 pins
74AHCT74PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT74PW,118 Flip Flops applications.
- Data Synchronizers
- Memory
- ESD protection
- Memory
- Modulo – n – counter
- Digital electronics systems
- Clock pulse
- Storage registers
- Supports Live Insertion
- Dynamic threshold performance
