74ALVC162334PAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape and Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.4 ns |
| Quiescent Current | 40μA |
| Family | ALVC/VCX/A |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 3.6 ns |
| High Level Output Current | 12mA |
| Low Level Output Current | 12mA |
| Control Type | ENABLE LOW |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVC162334PAG8 Overview
The package TSSOP includes it. It is packaged in a way that resembles Tape and Reel. It is also possible to terminate a transmission line with a 48 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. Keeping the supply voltage above 3.3V is necessary for normal operation of the device. The pin count is 48. There is an electronic part in this product that has been designed with 16 Bits. 2 terminations are the kind of termination that occurs when a transmission line is terminated with a device that matches the characteristic impedance of the transmission line. This electronic part is mounted in the way of Surface Mount. The 48 pins are designed to be a part of it. The device belongs to the ALVC/VCX/A family of electronic devices. Power comes from a 3.3V source. It consists of 1 elements. There is a part included in Bus Driver/Transceivers that is similar to this one. Channel number is increasing/declining: 16. The device consumes 40μA of quiescent current without being affected by external factors. 2.3V is the minimum supply voltage needed for it to operate. The voltage at which 3.6V can be supplied is maximal. In this case, 12mA represents the high level output current. Operating temperatures should be higher than -40°C. It is recommended that the operating temperature be lower than 85°C.
74ALVC162334PAG8 Features
TSSOP package
48 pin count
48 pins
3.3V power supplies
1 elements
74ALVC162334PAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74ALVC162334PAG8 Universal Bus Functions applications.
- Temperature detector circuits
- Mountain power station
- Light-activated burglar alarm
- Networking
- Electronic and electrical project circuits
- Digital Electronics
- Fishery-optical complementary power station
- Flashlight
- Push button switches
- Illumination
