74ALVC164245GRDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Weight | 99.705273mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO REQUIRES 3.3V TO 5.5V SUPPLY FOR PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | 74ALVC164245 |
| Pin Count | 54 |
| Number of Outputs | 16 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 2.4 ns |
| Family | ALVC/VCX/A |
| Logic Function | Level Shifter, Translator |
| Data Rate | 300 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 5V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 2.3V~3.6V |
| Voltage - VCCB | 3V~5.5V |
| Channels per Circuit | 8 |
| Width | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ALVC164245GRDR Overview
Level translators is embedded in the 54-TFBGA package.Packaged in the way of Cut Tape (CT).The output it is configured with uses Tri-State, Non-Inverted.Translator type Voltage Level is associated with this electrical device.Level translators is mounted according to the Surface Mount method.There is Bidirectional channel type for this electrical device.During operation, the temperature is set to -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 2 circuits.Transmission lines can be terminated using 54 terminations to end them.The base part number 74ALVC164245 can be used to find its related parts.There is a voltage supply of 2.7V which powers the device.There are 54 pins on this device.Level translators belongs to the series 74ALVC.54 pins are used in its design.Electronic parts are designed with a number of bits of 8.Level translators supports the maximal supply voltage of 5.5V.The minimal supply voltage is 2.3V.A VCCA supply rail is configured as 2.3V~3.6V.A VCCB supply rail is configured as 3V~5.5V.Electronic parts are mounted using Surface Mount.Level translators belongs to the group of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Level translators is a member of the ALVC/VCX/A family of electronic devices.Level translators consumes 40μA of quiescent current wLevel translatorshout being affected by outside factors.3.35V power supplies are required to run it.With an output current of 24mA, it offers maximum design flexibility.Its characteristics include ALSO REQUIRES 3.3V TO 5.5V SUPPLY FOR PORT B.There are 16 outputs configured on this device.
74ALVC164245GRDR Features
54-TFBGA package
2 circuits
54 pin count
74ALVC series
54 pins
3.35V power supplies
16 outputs
74ALVC164245GRDR Applications
There are a lot of Texas Instruments 74ALVC164245GRDR voltage translators & level shifters applications.
- Automotive infotainment
- Power-sensitive applications
- SMBus
- Extended Product-Change Notification
- Debouncing a mechanical switch
- Automotive
- Controlled Baseline
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Personal computers
- PMBus
