Parameters |
Packaging |
Tube |
Series |
74ALVC |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
1.65V~3.6V |
Base Part Number |
74ALVC16841 |
Output Type |
Tri-State |
Number of Elements |
2 |
Circuit |
10:10 |
Polarity |
Non-Inverting |
Number of Circuits |
20 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Number of Bits |
20 |
Propagation Delay |
3.5 ns |
Turn On Delay Time |
1 ns |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
20 |
Independent Circuits |
2 |
Number of Output Lines |
3 |
Delay Time - Propagation |
1ns |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Supplier Device Package |
56-TSSOP |
Operating Temperature |
-40°C~85°C |
74ALVC16841MTD Overview
A package called 56-TFSOP (0.240, 6.10mm Width) contains it. As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 1.65V~3.6V. The temperature at which the machine is operating is -40°C~85°C. The 74ALVC series contains FPGAs of this type. The design of this electronic part is based on 20 bits. It belongs to 74ALVC16841 family. 56 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. There are 20 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Input lines are converted into binary equivalents by 3 output lines. A total of 2 elements are contained in it. Its superior flexibility is achieved by using 20 circuits. 24mA is set as the low level output current. -24mA represents the high level output current. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. The maximum supply voltage is 3.6V. A minimal voltage of 1.65V is needed to operate it.
74ALVC16841MTD Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVC series
20 Bits
74ALVC16841 family
56 pins
2 elements
74ALVC16841MTD Applications
There are a lot of ON Semiconductor 74ALVC16841MTD Latches applications.
- Multistage ripple counting
- TV Set-top Boxes
- Registers
- Motor Drives
- Stacked or Push-Down Registers
- Frequency dividing
- Counter timers
- Counter control
- Control circuits
- Parallel data storage