74ALVC373PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 2.2 ns |
| Quiescent Current | 200nA |
| Turn On Delay Time | 2.2 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74ALVC373PW,118 Overview
20-TSSOP (0.173, 4.40mm Width) contains it. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 1.65V~3.6V voltage supply is required for operation. The temperature at which the machine is operating is -40°C~85°C. In the 74ALVC series, this FPGA is located. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74ALVC373. In order to function, the supply voltage should be set to 2.7V. 20 pins are available on it. ALVC/VCX/A is the family of this electronic device. It is designed with 20 pins. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. 3.6V is the maximum supply voltage (Vsup). Input Lines consist of electronic circuits, and there are 8. With an output current of 50mA, it is highly flexible in terms of design. The current consumed by the device is 200nA volts in quiescent mode, which cannot be affected by external factors.
74ALVC373PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74ALVC series
8 Bits
74ALVC373 family
20 pin count
20 pins
74ALVC373PW,118 Applications
There are a lot of Nexperia USA Inc. 74ALVC373PW,118 Latches applications.
- Parallel Input
- Phase comparator
- Synchronous frequency dividers
- PCs and Notebooks
- BCD counting
- Stacked or Push-Down Registers
- Shift left with parallel loading
- Serial Output Register
- Hammer Device Information
- Programmable binary
