74ALVC374D,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 300MHz |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 3.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ALVC374D,112 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. It belongs to the 74ALVCseries of FPGAs. Its output frequency should not exceed 300MHz Hz. In total, it contains 1 elements. Despite external influences, it consumes 10μAof quiescent current. A total of 20terminations have been recorded. The 74ALVC374family includes it. It is powered from a supply voltage of 2.7V. Input capacitance of this device is 3.5pF farads. This D flip flop belongs to the family of ALVC/VCX/A. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. An electronic part designed with 8bits is used in this application. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. To operate, the chip has a total of 8 output lines.
74ALVC374D,112 Features
Tube package
74ALVC series
20 pins
8 Bits
74ALVC374D,112 Applications
There are a lot of Nexperia USA Inc. 74ALVC374D,112 Flip Flops applications.
- Data storage
- Shift Registers
- Guaranteed simultaneous switching noise level
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- EMI reduction circuitry
- Shift registers
- Computers
- Pattern generators
- Frequency Divider circuits
