74ALVC574D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 300MHz |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 3.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74ALVC574D,118 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ALVCseries of FPGAs. A frequency of 300MHzshould be the maximum output frequency. In total, there are 1 elements. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 20 terminations. The 74ALVC574 family contains this object. A voltage of 2.7V provides power to the D latch. There is 3.5pF input capacitance for this T flip flop. A device of this type belongs to the family of ALVC/VCX/A. Surface Mount mounts this electronic component. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. An electronic part designed with 8bits is used in this application. Vsup reaches its maximum value at 3.6V. The D flip flop is embedded with 2ports. As of now, there are 8input lines.
74ALVC574D,118 Features
Tape & Reel (TR) package
74ALVC series
20 pins
8 Bits
74ALVC574D,118 Applications
There are a lot of Nexperia USA Inc. 74ALVC574D,118 Flip Flops applications.
- Consumer
- Single Down Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Frequency Divider circuits
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Balanced 24 mA output drivers
- Test & Measurement
- Memory
- EMI reduction circuitry
