74ALVC74BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Clock Frequency | 425MHz |
| Propagation Delay | 2.3 ns |
| Quiescent Current | 200nA |
| Turn On Delay Time | 3.7 ns |
| Family | ALVC/VCX/A |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| fmax-Min | 300 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVC74BQ,115 Overview
The flip flop is packaged in a case of 14-VFQFN Exposed Pad. D flip flop is included in the Tape & Reel (TR)package. This output is configured with Differential. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74ALVC series. There should be no greater frequency than 425MHzon its output. As a result, it consumes 10μA of quiescent current without being affected by external factors. 14terminations have occurred. The object belongs to the 74ALVC74 family. A voltage of 1.8V provides power to the D latch. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as ALVC/VCX/A. There is an electronic part mounted in the way of Surface Mount. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. The maximal supply voltage (Vsup) reaches 3.6V. Despite its superior flexibility, it relies on 2 circuits to achieve it. In order for the chip to function, it has 1output lines. It consumes a total of 200nA quiescent current at any given time.
74ALVC74BQ,115 Features
Tape & Reel (TR) package
74ALVC series
14 pins
74ALVC74BQ,115 Applications
There are a lot of Nexperia USA Inc. 74ALVC74BQ,115 Flip Flops applications.
- Data Synchronizers
- Circuit Design
- CMOS Process
- Memory
- Convert a momentary switch to a toggle switch
- Guaranteed simultaneous switching noise level
- Single Down Count-Control Line
- ESCC
- Storage registers
- Set-reset capability
