74ALVCF162835LRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCF |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCF162835 |
| Pin Count | 56 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.6 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 18mA 18mA |
| Logic Type | Universal Bus Driver |
| Prop. Delay@Nom-Sup | 3.5 ns |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCF162835LRG4 Overview
The package 56-BSSOP (0.295, 7.50mm Width) contains this file embedded in it. The package is packaged in the way that Tape & Reel (TR) would package it. It achieves superior flexibility through 18-Bit circuits. A Universal Bus Driver logic type is used in this electrical device. Surface Mount is pointing towards the electronic part. As far as the operating temperature is concerned, it should be higher than -40°C~85°C. In order to ensure maximum design flexibility, it features a High/Low output current of 18mA 18mA. A 74ALVCF series FPGA is a type of FPGA that is part of the family of FPGAs. It operates with a supply voltage of 2.3V~3.6V. As it belongs to the 74ALVCF162835 family, it should be taken into consideration. In 56 terminations, the transmission line is terminated with a device matching its characteristic impedance. Normal operation requires an output voltage above 2.5V. The pin count is 56. In order to design this electronic part, 18 Bits have been used. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Mounted in the way of Surface Mount is this electronic part. 56 pins are used in the design. This electronic device belongs to the family of ALVC/VCX/A. The maximal supply voltage (Vsup) reaches 3.6V. There should be a greater supply voltage (Vsup) than 2.3V. 3.3V power supplies power it. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. In Bus Driver/Transceivers, there is this part. A 18 output is configured on the board.
74ALVCF162835LRG4 Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCF series
74ALVCF162835 family
56 pin count
56 pins
3.3V power supplies
18 outputs
74ALVCF162835LRG4 Applications
There are a lot of Texas Instruments 74ALVCF162835LRG4 Universal Bus Functions applications.
- Data transmission control
- Troubleshooting & Judgment
- Tablets
- Electric grinding wheel
- Projector
- Data transfer
- Digital Electronics
- Solar energy generation
- Automatic watering system
- Television
