74ALVCH162268ZQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Additional Feature | WITH SYNCHRONOUS OUTPUT ENABLES AND MUX SELECT |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH162268 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Number of Bits | 12 |
| Propagation Delay | 5.4 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA; 12mA 12mA |
| Logic Type | Registered Bus Exchanger |
| Output Polarity | TRUE |
| Number of Input Lines | 12 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
74ALVCH162268ZQLR Overview
It is embedded in the 56-VFBGA package. I have packaged it in a way that is similar to Tape & Reel (TR)'s. A 12 ~ 24-Bit circuit is used for achieving its superior flexibility as a result of its use of 12 ~ 24-Bit circuits. The Logic type of this electrical device is Registered Bus Exchanger. It is mounted in the way of Surface Mount so that this electronic part can be seen. It is recommended that the operating temperature be higher than -40°C~85°C. Due to its high and low output current options, 24mA 24mA; 12mA 12mA's maximum level of flexibility is achieved when it comes to designing its features. It is a type of FPGA belonging to the 74ALVCH series. The voltage at which it operates is 1.65V~3.6V. As it belongs to the 74ALVCH162268 family, it should be taken into consideration. There are a number of termination types, including 56 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. As a rule of thumb, the supply voltage should be maintained above 1.8V to ensure normal operation. There are 56 pins on it. With 12 Bits, you can design electronic parts in a very flexible way. There are 3 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. 56 pins are used in the design. In the family of ALVC/VCX/A devices, this electronic device belongs. Upon reaching 3.6V, the maximum supply voltage (Vsup) is reached. A higher supply voltage (Vsup) should be used than the lower supply voltage (1.65V). The power source is 1.8/3.3V. It is also characterized by WITH SYNCHRONOUS OUTPUT ENABLES AND MUX SELECT. Other Logic ICs includes this part as part of its package. 12 input lines comprise an electronic circuit connected between the mains power and the rectifier input stage of the switching power supply.
74ALVCH162268ZQLR Features
56-VFBGA package
74ALVCH series
74ALVCH162268 family
56 pin count
56 pins
1.8/3.3V power supplies
74ALVCH162268ZQLR Applications
There are a lot of Texas Instruments 74ALVCH162268ZQLR Universal Bus Functions applications.
- Tablets
- Remote monitoring
- Scanner
- Digital watch
- Data transfer
- CMOS circuitry
- Alarm circuit using LDR
- Memory devices
- Calculator
- Audio
