74ALVCH162373PAG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 100μA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVCH162373PAG Overview
TSSOP contains it. There are 8 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. With the supply voltage set at 3.3V, it is able to operate. It is equipped with 48 pin count. It is part of the family of electronic devices called ALVC/VCX/A. Designed with 48 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. FF/Latches is the subcategory of this part. Input Lines consist of electronic circuits, and there are 16. High efficiency requires maintaining the supply voltage at 3.3V. It achieves superior flexibility by using 1 circuits. 12mA is set as the low level output current. In the high level output current, the value is set to -12mA. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. There is a maximum supply voltage of 3.6V supported by this device. This device requires a minimum voltage of 2.7V. It uses the logic IC BUS DRIVER.
74ALVCH162373PAG Features
TSSOP package
8 Bits
48 pin count
48 pins
74ALVCH162373PAG Applications
There are a lot of Integrated Device Technology (IDT) 74ALVCH162373PAG Latches applications.
- Storage
- Accumulator Registers
- Control circuits
- Sample and hold register
- Up/down difference counting
- Address register
- Multistage ripple counting
- Parallel-to-Serial Data Conversion
- Bus system register with enable parallel lines at bus side
- Parallel Input
