74ALVCH162820DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH162820 |
| Function | Standard |
| Number of Outputs | 20 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Number of Ports | 2 |
| Output Current | 12mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 6.4 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ALVCH162820DLRG4 Overview
56-BSSOP (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ALVCH series. A frequency of 150MHzshould be the maximum output frequency. A total of 1elements are present in it. As a result, it consumes 40μA quiescent current. A total of 56 terminations have been made. The 74ALVCH162820 family contains it. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 3.5pF farads. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 56pins on it. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. Its superior flexibility is attributed to its use of 2 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A D flip flop with 2embedded ports is available. With an output current of 12mA, it is possible to design the device in any way you want. In order for the chip to function, it has 3output lines.
74ALVCH162820DLRG4 Features
Tape & Reel (TR) package
74ALVCH series
56 pins
74ALVCH162820DLRG4 Applications
There are a lot of Texas Instruments 74ALVCH162820DLRG4 Flip Flops applications.
- Computing
- Data transfer
- Instrumentation
- Latch-up performance
- Storage registers
- 2 – Bit synchronous counter
- CMOS Process
- Bus hold
- Circuit Design
- Single Down Count-Control Line
