74ALVCH162820GRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH162820 |
| Function | Standard |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 6.4 ns |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCH162820GRG4 Overview
The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74ALVCH series. In order for it to function properly, its output frequency should not exceed 150MHz. In total, it contains 1 elements. There is a consumption of 40μAof quiescent energy. Terminations are 56. If you search by 74ALVCH162820, you will find similar parts. The power source is powered by 1.8V. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the ALVC/VCX/Afamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board has 56 pins. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. It is designed with a number of bits of 10. There is a 3.6Vmaximum supply voltage (Vsup). On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 3.3V power supplies attached to it. A D flip flop with 2embedded ports is available. With an output current of 12mA, this device offers maximum design flexibility. A total of 10input lines have been provided.
74ALVCH162820GRG4 Features
Tape & Reel (TR) package
74ALVCH series
56 pins
10 Bits
3.3V power supplies
74ALVCH162820GRG4 Applications
There are a lot of Texas Instruments 74ALVCH162820GRG4 Flip Flops applications.
- Balanced Propagation Delays
- Data transfer
- Automotive
- Latch-up performance
- CMOS Process
- ESD performance
- Bus hold
- Registers
- Storage Registers
- EMI reduction circuitry
