74ALVCH16282DBBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 80 |
| Weight | 265.096391mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 80 |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74ALVCH16282 |
| Pin Count | 80 |
| Number of Outputs | 36 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 18 ~ 36-Bit |
| Number of Ports | 3 |
| Number of Bits | 18 |
| Propagation Delay | 5.3 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 8.7 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Registered Bus Exchanger |
| Number of Input Lines | 18 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCH16282DBBRG4 Overview
As part of 80-TFSOP (0.240, 6.10mm Width), it is embedded. The package is packaged in the way that Tape & Reel (TR) would package it. Flexible 18 ~ 36-Bit circuits are used to achieve its superior performance. The Logic type of this electrical device is Registered Bus Exchanger. Surface Mount is pointing towards the electronic part. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. High/Low output currents allow 24mA 24mA to have a maximum design flexibility. The 74ALVCH series contains this type of FPGA. There is a supply voltage of 1.65V~3.6V that it operates on. As it belongs to the 74ALVCH16282 family, it should be taken into consideration. The 80 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. When the supply voltage is above 1.8V, the device will operate normally. There are a total of 96 pins on this device. There is an electronic part in this product that has been designed with 18 Bits. 3 terminations are the kind of termination that occurs when a transmission line is terminated with a device that matches the characteristic impedance of the transmission line. A Surface Mount-shaped electronic component is mounted here. A 80-pin design is used. Devices in this family are known as ALVC/VCX/A devices. The maximal supply voltage (Vsup) reaches 3.6V. A 3.3V power supply is used to operate it. It consists of 1 elements. As part of Other Logic ICs, this part is included. There is no influence of external factors on 40μA of quiescent current in this case. A 36 output is configured on the board. Between the switching power supply and the AC mains are 18 input lines, which consist of an electronic circuit.
74ALVCH16282DBBRG4 Features
80-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH16282 family
80 pin count
80 pins
3.3V power supplies
1 elements
36 outputs
74ALVCH16282DBBRG4 Applications
There are a lot of Texas Instruments 74ALVCH16282DBBRG4 Universal Bus Functions applications.
- Automotive voltage monitoring
- Memory devices
- Cell phone
- Flip flops
- Induction cooker
- Audio
- Arithmetic unit
- Digital driver ICs
- Scanner
- Fax machine
