Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74ALVCH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Base Part Number |
74ALVCH16373 |
Pin Count |
48 |
Output Type |
Tri-State |
Number of Elements |
2 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
1.65V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
16 |
Propagation Delay |
4.9 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
1 ns |
Family |
ALVC/VCX/A |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
3.6 ns |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Output Lines |
16 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74ALVCH16373DGGRG4 Overview
There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width). Tape & Reel (TR) is the packaging method. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. A 1.65V~3.6V voltage supply is required for operation. The operating temperature is -40°C~85°C. The 74ALVCH series is associated with this FPGA. The electronic part in this image has 16 bits. A device such as this has 48 terminations designed. The family in which it belongs to is 74ALVCH16373. The device is operated when the supply voltage is set to 1.8V. There are 48 pins on it. It is a member of the ALVC/VCX/A family of electronic devices. The pin configuration of the device is 48. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in Bus Driver/Transceiver. 3.6V is the maximum voltage (Vsup) that can be supplied. There are 3.3V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 1.65V. Considering the reliability of this device, it would be a good candidate for TR. The 24mA output current gives it maximum design flexibility. Input lines are generated as binary equivalents by 16 output lines. It consumes 40μA of quiescent current without being affected by outside factors. A total of 2 elements make up this object. A maximal power current (ICC) is generated for its operation at 0.04mA.
74ALVCH16373DGGRG4 Features
48-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
16 Bits
74ALVCH16373 family
48 pin count
48 pins
3.3V power supplies
2 elements
74ALVCH16373DGGRG4 Applications
There are a lot of Texas Instruments 74ALVCH16373DGGRG4 Latches applications.
- Serial Input
- Address register
- Network Switches
- Shift right register
- Parallel data synchronization
- Meter applications
- Buffer Storage
- Timers
- Display
- TV Set-top Boxes