74ALVCH16374DGG:11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 350MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 6.5 ns |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ALVCH16374DGG:11 Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A voltage of 1.2V~3.6Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ALVCHseries contain this type of chip. There should be no greater frequency than 350MHzon its output. In total, it contains 2 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. The number of terminations is 48. The object belongs to the 74ALVCH16374 family. The D flip flop is powered by a voltage of 2.5V . The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family ALVC/VCX/Acan be found here. 3.6Vis the maximum supply voltage (Vsup). A total of 2ports are embedded in the D flip flop.
74ALVCH16374DGG:11 Features
Tape & Reel (TR) package
74ALVCH series
74ALVCH16374DGG:11 Applications
There are a lot of Nexperia USA Inc. 74ALVCH16374DGG:11 Flip Flops applications.
- 2 – Bit synchronous counter
- Memory
- Latch-up performance
- Bus hold
- Divide a clock signal by 2 or 4
- Test & Measurement
- Individual Asynchronous Resets
- Buffered Clock
- Computers
- Count Modes
