74ALVCH16374DGGRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCH16374DGGRE4 Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ALVCHseries FPGA. Its output frequency should not exceed 150MHz. In total, there are 2 elements. It has been determined that there have been 48 terminations. The 74ALVCH16374 family contains this object. Power is provided by a 1.8V supply. This T flip flop has a capacitance of 3pF farads at the input. A device of this type belongs to the family of ALVC/VCX/A. There is an electronic component mounted in the way of Surface Mount. It is designed with 48 pins. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 16. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 1.65V. Considering the reliability of this T flip flop, it is well suited for TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 24mA, this device offers maximum design flexibility. It has 8 output lines to operate. 40μAquiescent current consumed.
74ALVCH16374DGGRE4 Features
Tape & Reel (TR) package
74ALVCH series
48 pins
16 Bits
74ALVCH16374DGGRE4 Applications
There are a lot of Texas Instruments 74ALVCH16374DGGRE4 Flip Flops applications.
- Differential Individual
- Instrumentation
- Individual Asynchronous Resets
- Common Clocks
- Communications
- Circuit Design
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Count Modes
- Storage Registers
