74ALVCH16374ZQLR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 5 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCH16374ZQLR Overview
It is embeded in 56-VFBGA case. The Tape & Reel (TR)package contains it. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74ALVCH series. Its output frequency should not exceed 150MHz Hz. D latch consists of 2 elements. 56terminations have occurred. Members of the 74ALVCH16374family make up this object. Power is provided by a 1.8V supply. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the ALVC/VCX/Afamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. There are 16bits in its design. Normal operation requires a supply voltage (Vsup) above 1.65V. As a result of its reliable performance, this T flip flop is suitable for TR. A D flip flop with 2embedded ports is available. With a current output of 24mA , it offers maximum design flexibility. To operate, the chip has a total of 3 output lines. Quiescent current is consumed by the D latch in the amount of 40μA.
74ALVCH16374ZQLR Features
Tape & Reel (TR) package
74ALVCH series
56 pins
16 Bits
74ALVCH16374ZQLR Applications
There are a lot of Texas Instruments 74ALVCH16374ZQLR Flip Flops applications.
- Computing
- Power down protection
- Shift Registers
- Buffered Clock
- Latch
- Modulo – n – counter
- Bounce elimination switch
- Load Control
- Communications
- Computers
