74ALVCH16525DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLOCK ENABLE FOR EACH REGISTER |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH16525 |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 18 |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 6.3 ns |
| Family | ALVC/VCX/A |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 4.2 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ALVCH16525DGGRE4 Overview
As part of 56-TFSOP (0.240, 6.10mm Width), it is embedded. In the way of Tape & Reel (TR), it is packaged. A 18-Bit-circuit is used to provide its superior flexibility. This electrical device is of the Universal Bus Transceiver logic type. An electronic part such as this one is mounted in the way of the Surface Mount-axis. It is recommended that the operating temperature be higher than -40°C~85°C. In order to ensure maximum design flexibility, it features a High/Low output current of 24mA 24mA. FPGAs in the 74ALVCH series are this type. With a voltage supply of 1.65V~3.6V, it is able to operate. As it belongs to the 74ALVCH16525 family, it should be taken into consideration. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended that the supply voltage be kept above 1.8V for normal operation. 56 pins are included. A 18-Bit electronic part was designed for this application. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. In this case, the electronic part is mounted in the direction of Surface Mount. The 56 pins are designed into it. The electronic device in question belongs to the ALVC/VCX/A family of electronic devices. At this point, Vsup reaches its maximum value. Powered by 3.3V batteries, it operates on a 12V system. The element consists of 1 elements in total. It is configured with a trigger that uses a POSITIVE EDGE-value. As a result of its reliable performance, this device is well suited for TAPE AND REEL. The second characteristic that it has is WITH CLOCK ENABLE FOR EACH REGISTER. We are seeing an increase in the number of channels, which is good/bad: 18.
74ALVCH16525DGGRE4 Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH16525 family
56 pin count
56 pins
3.3V power supplies
1 elements
74ALVCH16525DGGRE4 Applications
There are a lot of Texas Instruments 74ALVCH16525DGGRE4 Universal Bus Functions applications.
- Digital driver ICs
- Embedded system
- Memory devices
- Memory
- Small and medium distributed photovoltaic power generation system
- Reactive power compensation function
- measuring instrument
- Safety thermostat
- Square wave oscillators
- Illumination
