74ALVCH16821DGGY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | CAN ALSO OPERATE AT VOLTAGE 3-3.6 |
| Technology | CMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Clock Frequency | 350MHz |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 40μA |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ALVCH16821DGGY Overview
The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 2.3V~2.7V 3V~3.6V is required for operation. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74ALVCHseries comprises this type of FPGA. It should not exceed 350MHzin terms of its output frequency. In total, there are 2 elements. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The power supply voltage is 2.5V. Its input capacitance is 5pF farads. An electronic device belonging to the family ALVC/VCX/Acan be found here. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 56. In this device, the clock edge trigger type is Positive Edge. The D flip flop has no ports embedded. It consumes 40μA current. Additionally, you may refer to the D latch's additional CAN ALSO OPERATE AT VOLTAGE 3-3.6.
74ALVCH16821DGGY Features
Tape & Reel (TR) package
74ALVCH series
56 pins
74ALVCH16821DGGY Applications
There are a lot of Nexperia USA Inc. 74ALVCH16821DGGY Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Data transfer
- Power down protection
- Balanced 24 mA output drivers
- Instrumentation
- Guaranteed simultaneous switching noise level
- Event Detectors
- Storage Registers
- Communications
