Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
56 |
Weight |
252.792698mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
56 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Pin Count |
56 |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
24mA |
Number of Bits |
10 |
Propagation Delay |
5.6 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
1 ns |
Family |
ALVC/VCX/A |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Prop. Delay@Nom-Sup |
3.9 ns |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Number of Input Lines |
20 |
Length |
14mm |
Width |
6.1mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74ALVCH16841DGGRE4 Overview
In the TSSOP package, it is embedded. Tape and Reel is the packaging method. An electronic part with 10 bits is designed. A device with this design has 56 terminations. A 1.8V voltage supply is required for operation. There are 56 pins attached to it. ALVC/VCX/A is the family of this electronic device. With the design of the board, there are only 56 pins. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. The system is powered by 3.3V sources. Input Lines consist of electronic circuits, and there are 20. It consumes 40μA current from its quiescent state without being affected by external factors at all. This object is composed of 2 elements. In the low level output current, the value is set to 24mA. It is set to zero for the high level output current. A temperature below 85°C should be used for operation. The operating temperature should be higher than -40°C. The supply voltage is limited to 3.6V. It operates with the minimal supply voltage of 1.65V. It uses a logic IC of type BUS DRIVER. The 24mA output current gives it maximum design flexibility.
74ALVCH16841DGGRE4 Features
TSSOP package
10 Bits
56 pin count
56 pins
3.3V power supplies
2 elements
74ALVCH16841DGGRE4 Applications
There are a lot of Texas Instruments 74ALVCH16841DGGRE4 Latches applications.
- Shift Registers
- Frequency dividing
- Automatic test equipment
- Instrumentation
- Multi-line decoders
- Four-bit storage with output enable
- Decade counting 7-segment decimal display
- Shift left register
- OC-48 communication systems
- General-Purpose Register