74ALVCHR16269ALG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ALVCHR |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCHR16269 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Output Current | 12mA |
| Number of Bits | 24 |
| Propagation Delay | 5.8 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Registered Bus Exchanger |
| Output Polarity | TRUE |
| Number of Input Lines | 12 |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ALVCHR16269ALG4 Overview
The package 56-BSSOP (0.295, 7.50mm Width) includes it. In the way of Tube, it is packaged. Flexible 12 ~ 24-Bit circuits are used to achieve its superior performance. The Logic type of this electrical device is Registered Bus Exchanger. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. Operating temperatures should be higher than -40°C~85°C. In addition, 12mA 12mA features the highest level of flexibility in its design due to its high and low output currents. FPGAs in the 74ALVCHR series are this type. Using 1.65V~3.6V as a supply voltage, it operates. It belongs to 74ALVCHR16269 family. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to maintain normal operation of the device, the supply voltage should remain above 1.8V. There is a 56 pin count that is included in this device. 24 Bits were used in the design of this electronic part. Transmission lines can be terminated with 3 terminations by using a device that matches the characteristic impedance. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. A 56-pin design is used. In the family of ALVC/VCX/A devices, this electronic device belongs. Upon reaching 3.6V, the maximum supply voltage (Vsup) is reached. It is necessary to have a greater supply voltage (Vsup) than 1.65V in order to operate correctly. A 3.3V power supply is used to operate it. As a result of the output current 12mA, this device offers maximum design flexibility. In Other Logic ICs, this part is included. In addition, 12 input lines are also available, which are made up of an electronic circuit connecting the AC mains to the rectifier input stage of the switching power supply.
74ALVCHR16269ALG4 Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCHR series
74ALVCHR16269 family
56 pin count
56 pins
3.3V power supplies
74ALVCHR16269ALG4 Applications
There are a lot of Texas Instruments 74ALVCHR16269ALG4 Universal Bus Functions applications.
- In-vehicle system
- Electric shaver
- Automatic digital control circuits
- Arithmetic unit
- Overcurrent/Short circuit protection
- Microcontrollers
- Audio
- Memory
- Grid adaptation function
- Pocket PC
