banner_page

74ALVCHR16409LRG4

74ALVCHR16409LRG4 datasheet pdf and Logic - Universal Bus Functions product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ALVCHR16409LRG4
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 467
  • Description: 74ALVCHR16409LRG4 datasheet pdf and Logic - Universal Bus Functions product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ALVCHR
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Subcategory Other Logic ICs
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.635mm
Base Part Number 74ALVCHR16409
Pin Count 56
Number of Outputs 18
Number of Elements 1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Number of Circuits 9-Bit, 4-Port
Number of Ports 4
Number of Bits 9
Propagation Delay 6.2 ns
Quiescent Current 40μA
Turn On Delay Time 7.8 ns
Family ALVC/VCX/A
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 12mA 12mA
Logic Type Universal Bus Exchanger
Height Seated (Max) 2.79mm
Width 7.49mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74ALVCHR16409LRG4 Overview


There is an embedded version of it in the 56-BSSOP (0.295, 7.50mm Width) package. Tape & Reel (TR) is how it's packaged. A 9-Bit, 4-Port circuit is used for achieving its superior flexibility as a result of its use of 9-Bit, 4-Port circuits. As far as the logic type of this electrical device is concerned, it is Universal Bus Exchanger. Surface Mount is pointing towards the electronic part. -40°C~85°C should be higher than the operating temperature. It features maximum design flexibility thanks to its High/Low output current. FPGAs in the 74ALVCHR series are this type. The supply voltage is 1.65V~3.6V. The 74ALVCHR16409 family is the one that this is part of. In 56 terminations, a transmission line is terminated with an impedance-matched device. The supply voltage should be kept above 1.8V for normal operation. The 56 pin count is provided. It is designed with 9 Bits. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 4 terminations. A Surface Mount-shaped electronic component is mounted here. 56 pins are used in the design of this board. In the family of ALVC/VCX/A devices, this electronic device belongs. Upon reaching 3.6V, the maximum supply voltage (Vsup) is reached. 3.3V power supplies are used to power it. 1 elements are included in it. As part of Other Logic ICs, this part is included. It is in this case that 40μA of quiescent current is consumed without being affected by external factors in any way. The outputs are configured with 18.

74ALVCHR16409LRG4 Features


56-BSSOP (0.295, 7.50mm Width) package
74ALVCHR series
74ALVCHR16409 family
56 pin count
56 pins
3.3V power supplies
1 elements
18 outputs

74ALVCHR16409LRG4 Applications


There are a lot of Texas Instruments 74ALVCHR16409LRG4 Universal Bus Functions applications.

  • Range hood
  • Street lights
  • Mobile caravan
  • Roof distributed power station
  • In-vehicle system
  • Electricity for military and civilian life in areas without electricity
  • Square wave oscillators
  • Electrical tools
  • Microcontrollers
  • Reactive power compensation function

Write a review

Note: HTML is not translated!
    Bad           Good