74ALVT162821DL,512
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT162821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.2 ns |
| Quiescent Current | 5.1mA |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 8mA 12mA; 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74ALVT |
| JESD-609 Code | e4 |
74ALVT162821DL,512 Overview
The flip flop is packaged in a case of 56-BSSOP (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2.3V~2.7V 3V~3.6Vvolts. -40°C~85°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74ALVT series. You should not exceed 150MHzin its output frequency. The list contains 2 elements. Currently, there are 56 terminations. You can search similar parts based on 74ALVT162821. It is powered from a supply voltage of 2.5V. This T flip flop has a capacitance of 3pF farads at the input. Electronic part Surface Mountis mounted in the way. 56pins are included in its design. This device has Positive Edgeas its clock edge trigger type. The design is based on 10bits. A total of 2ports are embedded in the D flip flop. There are 10 output lines in this JK flip flop. This D latch consumes 5.1mA quiescent current at all.
74ALVT162821DL,512 Features
Tube package
74ALVT series
56 pins
10 Bits
74ALVT162821DL,512 Applications
There are a lot of Nexperia USA Inc. 74ALVT162821DL,512 Flip Flops applications.
- Single Down Count-Control Line
- Automotive
- Data Synchronizers
- Test & Measurement
- Modulo – n – counter
- ESCC
- Parallel data storage
- ATE
- Frequency division
- Bounce elimination switch
