74ALVT162821DL,518
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT162821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.2 ns |
| Quiescent Current | 5.1mA |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 8mA 12mA; 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74ALVT162821DL,518 Overview
The package is in the form of 56-BSSOP (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2.3V~2.7V 3V~3.6Vvolts. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74ALVT series. In order for it to function properly, its output frequency should not exceed 150MHz. The element count is 2 . 56terminations have occurred. You can search similar parts based on 74ALVT162821. An input voltage of 2.5Vpowers the D latch. Its input capacitance is 3pFfarads. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 56. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. An electronic part with 10bits has been designed. The flip flop contains 2ports. In order for the chip to function, it has 10output lines. It consumes 5.1mA of quiescent current without being affected by external factors.
74ALVT162821DL,518 Features
Tape & Reel (TR) package
74ALVT series
56 pins
10 Bits
74ALVT162821DL,518 Applications
There are a lot of Nexperia USA Inc. 74ALVT162821DL,518 Flip Flops applications.
- ESD performance
- Storage registers
- Balanced Propagation Delays
- Buffer registers
- Patented noise
- Clock pulse
- Event Detectors
- ESCC
- Count Modes
- Test & Measurement
