74ALVT16373DGG,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 1.8 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Power Supply Current-Max (ICC) | 4.5mA |
| Independent Circuits | 1 |
| Number of Output Lines | 16 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ALVT16373DGG,518 Overview
The 48-TFSOP (0.240, 6.10mm Width) package contains it. This package has the format of Tape & Reel (TR). Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2.3V~2.7V 3V~3.6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74ALVT series. With this electronic part, there are 8 bits. In this device, there are 48 terminations. The family it belongs to is 74ALVT16373. In order to operate it, the supply voltage must be 2.5V. The 48 pind are equipped with it. The pin configuration of the device is 48. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. A binary equivalent of the input line is generated by the 16 output lines. It achieves superior flexibility by using 2 circuits. Maximum power supply (ICC) for its operation is 4.5mA.
74ALVT16373DGG,518 Features
48-TFSOP (0.240, 6.10mm Width) package
74ALVT series
8 Bits
74ALVT16373 family
48 pin count
48 pins
74ALVT16373DGG,518 Applications
There are a lot of Nexperia USA Inc. 74ALVT16373DGG,518 Latches applications.
- Phase comparator
- Shift right register
- Meter applications
- Automotive Body Electronics
- Data acquisition
- Stacked or Push-Down Registers
- Counting
- Shift Registers
- BCD counting
- Storage
