74ALVT16374DL,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | CAN ALSO OPERATE AT 3.3V SUPPLY |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 250MHz |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 4.5 ns |
| Power Supply Current-Max (ICC) | 4.5mA |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ALVT16374DL,118 Overview
The flip flop is packaged in a case of 48-BSSOP (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2.3V~2.7V 3V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74ALVT series. You should not exceed 250MHzin the output frequency of the device. A total of 2elements are present in it. There is 100μA quiescent consumption. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74ALVT16374family make up this object. A voltage of 2.5V is used as the power supply for this D latch. Input capacitance of this device is 3pF farads. It is part of the FF/Latchesbase part number family. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 3.3Vis required to operate it. There are 2 ports embedded in the flip flops. It is also characterized by CAN ALSO OPERATE AT 3.3V SUPPLY.
74ALVT16374DL,118 Features
Tape & Reel (TR) package
74ALVT series
3.3V power supplies
74ALVT16374DL,118 Applications
There are a lot of NXP USA Inc. 74ALVT16374DL,118 Flip Flops applications.
- Individual Asynchronous Resets
- Supports Live Insertion
- Circuit Design
- Guaranteed simultaneous switching noise level
- Common Clocks
- Storage Registers
- Cold spare funcion
- Power down protection
- Test & Measurement
- Memory
