74ALVT16501DGG,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| HTS Code | 8542.39.00.01 |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16501 |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 5.7 ns |
| Power Supply Current-Max (ICC) | 4.5mA |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ALVT16501DGG,118 Overview
Embedded in the 56-TFSOP (0.240, 6.10mm Width) package, it is used by many applications. The package is packaged in the way that Tape & Reel (TR) would package it. A 18-Bit-circuit is used to provide its superior flexibility. The Logic type of this electrical device is Universal Bus Transceiver. It is mounted in the way of Surface Mount so that this electronic part can be seen. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. As 8mA 24mA; 32mA 64mA offers a high/low output current, it is versatile in terms of design. It is a type of FPGA belonging to the 74ALVT series. 2.3V~2.7V 3V~3.6V is the supply voltage. As it belongs to the 74ALVT16501 family, it should be taken into consideration. Transmission lines can be terminated with 56 terminations by using a device that matches the characteristic impedance. As a rule of thumb, the supply voltage should be maintained above 2.5V to ensure normal operation. In addition, it is equipped with a 56 pin count. There is an electronic part in this product that has been designed with 18 Bits. Transmission lines can be terminated with 2 terminations by using a device that matches the characteristic impedance. Upon reaching 2.7V, the supply voltage (Vsup) reaches its maximum value. It is necessary to have a greater supply voltage (Vsup) than 2.3V in order to operate correctly. Furthermore, it has the characteristic of WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION as well.
74ALVT16501DGG,118 Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVT series
74ALVT16501 family
56 pin count
74ALVT16501DGG,118 Applications
There are a lot of NXP USA Inc. 74ALVT16501DGG,118 Universal Bus Functions applications.
- Cell phone
- Audio
- VCR
- Roof distributed power station
- Disk read-write IC
- MPPT function (maximum power point tracking)
- Solar energy generation
- CMOS circuitry
- Scanner
- Automotive voltage monitoring
