74ALVT16821DGG,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Base Part Number | 74ALVT16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 5.1mA |
| Turn On Delay Time | 1.7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 70μA |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ALVT16821DGG,112 Overview
The flip flop is packaged in a case of 56-TFSOP (0.240, 6.10mm Width). D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 2.3V~2.7V 3V~3.6V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. The FPGA belongs to the 74ALVT series. Its output frequency should not exceed 150MHz. A total of 2elements are contained within it. There is 70μA quiescent consumption. The 74ALVT16821family includes it. Input capacitance of this device is 3pF farads. Surface Mount mounts this electronic component. It is designed with 56 pins. This device has the clock edge trigger type of Positive Edge. There are 20bits in its design. There are 10 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Despite external influences, it consumes 5.1mAof quiescent current.
74ALVT16821DGG,112 Features
Tube package
74ALVT series
56 pins
20 Bits
74ALVT16821DGG,112 Applications
There are a lot of Nexperia USA Inc. 74ALVT16821DGG,112 Flip Flops applications.
- Latch
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Cold spare funcion
- ATE
- Load Control
- Individual Asynchronous Resets
- Reduced system switching noise
