74ALVT16823DGG,118
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.9 ns |
| Turn On Delay Time | 2.9 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 3.1ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 9 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ALVT16823DGG,118 Overview
The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.3V~2.7V 3V~3.6V. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74ALVT series. A frequency of 250MHzshould not be exceeded by its output. D latch consists of 2 elements. As a result, it consumes 100μA quiescent current and is not affected by external forces. The number of terminations is 56. If you search by 74ALVT16823, you will find similar parts. A voltage of 2.5V is used to power it. The input capacitance of this JK flip flopis 3pF farads. There is an electronic part that is mounted in the way of Surface Mount. The 56pins are designed into the board. It has a clock edge trigger type of Positive Edge. There are 9bits in its design. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The D flip flop has no ports embedded. To operate, the chip has a total of 9 output lines.
74ALVT16823DGG,118 Features
Tape & Reel (TR) package
74ALVT series
56 pins
9 Bits
74ALVT16823DGG,118 Applications
There are a lot of Nexperia USA Inc. 74ALVT16823DGG,118 Flip Flops applications.
- ESD protection
- Single Up Count-Control Line
- Circuit Design
- QML qualified product
- Bounce elimination switch
- Data storage
- Latch-up performance
- Computers
- Supports Live Insertion
- Bus hold
