74ALVT16823DL,518
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | ALSO OPERATES FROM 3V TO 3.6V SUPPLY |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.9 ns |
| Quiescent Current | 3.9mA |
| Turn On Delay Time | 2.9 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 3.1ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ALVT16823DL,518 Overview
In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2.3V~2.7V 3V~3.6Vis used as the supply voltage. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ALVTseries contain this type of chip. You should not exceed 250MHzin the output frequency of the device. A total of 2elements are present in it. It consumes 100μA of quiescent A total of 56 terminations have been made. It is a member of the 74ALVT16823 family. It is powered by a voltage of 2.5V . Input capacitance of this device is 3pF farads. Surface Mount mounts this electronic component. It is designed with 56 pins. This device exhibits a clock edge trigger type of Positive Edge. There are 9bits in this flip flop. The flip flop has 2ports embedded within it. To operate, the chip has a total of 9 output lines. It consumes 3.9mA of quiescent current without being affected by external factors. In addition, ALSO OPERATES FROM 3V TO 3.6V SUPPLYis a characteristic of it.
74ALVT16823DL,518 Features
Tape & Reel (TR) package
74ALVT series
56 pins
9 Bits
74ALVT16823DL,518 Applications
There are a lot of Nexperia USA Inc. 74ALVT16823DL,518 Flip Flops applications.
- Consumer
- ESD protection
- Patented noise
- Shift registers
- Set-reset capability
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Load Control
- ATE
- Latch-up performance
