74AUP1G125FX4-7
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Family | AUP/ULP/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Buffer, Non-Inverting |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 24 ns |
| Propagation Delay (tpd) | 24 ns |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 0.4mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
74AUP1G125FX4-7 Overview
Logical driver uses a neat 6-XFDFN package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74AUP series devices. 6 terminations with different functions. Buffer IC reuqires a supply voltage of 3V. Electronic parts from the AUP/ULP/V family are used in this part. 6 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 6 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is generally sold in TAPE AND REEL package. To supply the device, a minimum voltage of 0.8V is a must. 1 bits are included within the electrical component.
74AUP1G125FX4-7 Features
Bus Driver/Transceivers
74AUP1G125FX4-7 Applications
There are a lot of Diodes Incorporated 74AUP1G125FX4-7 Buffers & Transceivers applications.
- Desktop radio
- Wireless HD Photography
- 1x/2x Fiber Channel
- Televisions
- IP cameras
- Cell phones
- LAN, SAN, WAN (local, storage, work area networks)
- SONET/SDH Network
- Car alarm systems
- Changeing the frequency from IF to RF
