74AUP1G125SE-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AUP1G125 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Quiescent Current | 500nA |
| Family | AUP/ULP/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Buffer, Non-Inverting |
| Prop. Delay@Nom-Sup | 24 ns |
| Propagation Delay (tpd) | 24 ns |
| Control Type | ENABLE LOW |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AUP1G125SE-7 Overview
Logical driver uses a neat 5-TSSOP, SC-70-5, SOT-353 package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AUP series devices. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 3V. This logical driver is a member of the AUP/ULP/V family. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 5 pins. Enhanced with 2 ports. You can search "74AUP1G125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 500nA. It is generally sold in TAPE AND REEL package. To supply the device, a minimum voltage of 0.8V is a must. 1 bits are included within the electrical component. It is sufficient to make 1 outputs.
74AUP1G125SE-7 Features
Bus Driver/Transceivers
74AUP1G125SE-7 Applications
There are a lot of Diodes Incorporated 74AUP1G125SE-7 Buffers & Transceivers applications.
- Optical sub-assembly (OSA)
- Structural bonding
- Low power, low voltage systems
- Solenoids
- Single to Multimode Fiber Conversion
- Switching system
- Vehicle, ship, aircraft navigation and positioning
- Thermal management
- Desktop radio
- Fiber optic cable connection network
