74AUP1G126FW4-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Quiescent Current | 500nA |
| Family | AUP/ULP/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Buffer, Non-Inverting |
| Prop. Delay@Nom-Sup | 24 ns |
| Propagation Delay (tpd) | 24 ns |
| Control Type | ENABLE HIGH |
| Height Seated (Max) | 0.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AUP1G126FW4-7 Overview
Logical driver uses a neat 6-XFDFN package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74AUP series devices. 6 terminations with different functions. Buffer IC reuqires a supply voltage of 3V. In the AUP/ULP/V family, the electric component belongs. 6 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 6 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 500nA. It is generally sold in TAPE AND REEL package. To supply the device, a minimum voltage of 0.8V is a must. 1 bits are included within the electrical component.
74AUP1G126FW4-7 Features
Bus Driver/Transceivers
74AUP1G126FW4-7 Applications
There are a lot of Diodes Incorporated 74AUP1G126FW4-7 Buffers & Transceivers applications.
- Wireless modems
- TV signal transmission
- Wireless multimedia center in smart home
- Cable network front end
- Low power, low voltage systems
- Military satellite communications
- IP cameras
- Cordless telephone
- Satellite radio receiver
- Changeing the frequency from IF to RF
