74AUP1G19GW,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AUP1G19 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Propagation Delay | 11.5 ns |
| Quiescent Current | 5μA |
| Family | AUP/ULP/V |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AUP1G19GW,125 Overview
Providing this information in the 6-TSSOP, SC-88, SOT-363 enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 0.8V~3.6V voltage.These multiplexers are members of the 74AUP series, which provide extensive application potential.It is designed with 6 terminations as part of its basic configuration.There is a base part number of 74AUP1G19 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 1.1V volts.In this turn signal switch, there are 6 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.A total of 6 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of AUP/ULP/V.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 0.8V.There are 2 outputs designed to operate the turn signal switch.In the absence of external influences, it consumes 5μA current of multiplexer ic.It is possible to accept voltage levels by using one of the 1 input lines of multiplexers.
74AUP1G19GW,125 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
1 input lines
74AUP1G19GW,125 Applications
There are a lot of Nexperia USA Inc. 74AUP1G19GW,125 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Microprocessor input/output systems
- Arithmetic Logic Units
- High-performance memory systems
- Electronic circuits
- Relay
- PCIe
- Time division multiplexing system
- Transmission from the computer system of a satellite
- Electronics industry
