74AUP1G373GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AUP1G373 |
| Pin Count | 6 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Channels | 1 |
| Number of Bits | 1 |
| Propagation Delay | 25.9 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 2.5 ns |
| Family | AUP/ULP/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 1 |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AUP1G373GM,115 Overview
The 6-XFDFN package contains it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Surface Mount. With a supply voltage of 0.8V~3.6V, it operates. A temperature of -40°C~125°C is set as the operating temperature. The 74AUP series contains FPGAs of this type. There are 1 bits in this electronic part. In this device, there are 6 terminations. 74AUP1G373 is the family name of it. In order to operate it, the supply voltage must be 1.2V. The device is equipped with 6 pins. In terms of electronic devices, this one is in the AUP/ULP/V family. With the design of the board, there are only 6 pins. Surface Mount is the way in which this electronic part is mounted. A supply voltage (Vsup) greater than 0.8V is required. Regardless of the input line, the binary equivalent of the input line will be generated by the 1 output lines. The current consumed by the device is 500nA volts in quiescent mode, which cannot be affected by external factors.
74AUP1G373GM,115 Features
6-XFDFN package
74AUP series
1 Bits
74AUP1G373 family
6 pin count
6 pins
74AUP1G373GM,115 Applications
There are a lot of Nexperia USA Inc. 74AUP1G373GM,115 Latches applications.
- Communication systems
- Address register
- Motor Drives
- Decade counting 7-segment decimal display
- Hammer Device Information
- Phase comparator
- Parallel data storage
- Buffer/Storage Registers
- TV Set-top Boxes
- General-Purpose Register
