74AUP1G374GS,132
| Parameters | |
|---|---|
| Trigger Type | Positive Edge |
| Input Capacitance | 0.8pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74AUP1G374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Bits | 1 |
| Clock Frequency | 309MHz |
| Propagation Delay | 21.6 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 23.6 ns |
| Family | AUP/ULP/V |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
74AUP1G374GS,132 Overview
It is embeded in 6-XFDFN case. Package Tape & Reel (TR)embeds it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 0.8V~3.6Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74AUPseries contain this type of chip. Its output frequency should not exceed 309MHz. D latch consists of 1 elements. Currently, there are 6 terminations. The 74AUP1G374family includes it. It is powered from a supply voltage of 1.1V. Its input capacitance is 0.8pFfarads. The electronic device belongs to the AUP/ULP/Vfamily. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 6. The clock edge trigger type for this device is Positive Edge. 1bits are used in its design. It is imperative that the supply voltage (Vsup) is maintained above 0.8Vin order to ensure normal operation. There is 500nA quiescent current consumption by it.
74AUP1G374GS,132 Features
Tape & Reel (TR) package
74AUP series
6 pins
1 Bits
74AUP1G374GS,132 Applications
There are a lot of Nexperia USA Inc. 74AUP1G374GS,132 Flip Flops applications.
- Computing
- Pattern generators
- Bus hold
- Frequency Divider circuits
- Data Synchronizers
- Individual Asynchronous Resets
- Test & Measurement
- Frequency Dividers
- Storage Registers
- Computers
