74AUP1G74GM,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AUP1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 315MHz |
| Propagation Delay | 23.3 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 2.2 ns |
| Family | AUP/ULP/V |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 0.6pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AUP1G74GM,125 Overview
8-XFQFN Exposed Padis the way it is packaged. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 0.8V~3.6V. It is operating at a temperature of -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74AUP series. You should not exceed 315MHzin the output frequency of the device. 8terminations have occurred. The 74AUP1G74family includes it. A voltage of 1.2V provides power to the D latch. This JK flip flop has a 0.6pFfarad input capacitance. In this case, the D flip flop belongs to the AUP/ULP/Vfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board has 8 pins. This device has the clock edge trigger type of Positive Edge. It is designed with a number of bits of 1. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. The superior flexibility is achieved through the use of 1 circuits. It consumes 500nA current.
74AUP1G74GM,125 Features
Tape & Reel (TR) package
74AUP series
8 pins
1 Bits
74AUP1G74GM,125 Applications
There are a lot of Nexperia USA Inc. 74AUP1G74GM,125 Flip Flops applications.
- ESD protection
- Memory
- Count Modes
- Storage Registers
- Balanced 24 mA output drivers
- Data storage
- Cold spare funcion
- EMI reduction circuitry
- Frequency Divider circuits
- CMOS Process
